# Saudi HORECA Riyadh 2026: exhibitor guide and stand build

> Saudi HORECA Riyadh 2026: 7–9 December at Riyadh Front Exhibition & Conference Center. Exhibitor guide and how to get your stand built in Saudi Arabia.

Source: https://bilievent.com/events/saudi-horeca-riyadh-2026/ · bilievent · 2026-11-15

**Saudi HORECA Riyadh 2026** takes place on 7–9 December 2026 at Riyadh Front Exhibition & Conference Center in Riyadh, and the show is on schedule according to its official website when we last checked on 29 October 2026. Known in Arabic as معرض هوريكا الرياض, it is a trade show for hospitality, foodservice and food and beverage, organised by SEMARK under a licence agreement with Hospitality Services SARL, and its organiser describes it as the biggest international food, beverage and hospitality exhibition in Saudi Arabia.

This guide is for companies deciding whether and how to exhibit. It covers the key facts, who the show suits, what the exhibitor manual asked for at the last edition, the mistakes that keep repeating at hospitality expos, and how to plan an exhibition stand (or exhibition booth, as many buyers call it) so it is ready before build-up starts, not during it.

## Key takeaways

- Saudi HORECA Riyadh 2026 runs on 7–9 December 2026 at Riyadh Front Exhibition & Conference Center; the countdown on the official site ends at the opening on 7 December at 4:00 pm.

- The organiser offers shell scheme stands from 12 m² (3 × 4 m), space-only plots for stands over 24 m², and double-deck stands built to a design agreed and signed with the contract.

- The 2025 exhibitor manual asked space-only exhibitors for stand drawings at least one month before the show; if the rule stays the same, that points to around 7 November 2026.

- The same manual capped stand height at 3.5 m unless the organiser agreed in writing, tied electricity orders to a grid plan, and charged extra for late orders.

- Exact build-up and hand-over times come from the 2026 manual, so request it early instead of relying on last year’s edition.

## Saudi HORECA Riyadh 2026: key facts

| 
Item | 
Details | 

| 
Dates | 
7–9 December 2026; opening on 7 December at 4:00 pm | 

| 
City and venue | 
Riyadh, Riyadh Front Exhibition & Conference Center on King Khalid International Airport Road | 

| 
Organiser | 
SEMARK, licensed by Hospitality Services SARL | 

| 
Sectors | 
Hospitality, foodservice, food and beverage | 

| 
Who exhibits / who visits | 
Hospitality, foodservice and beverage companies / a specialised trade audience looking for trends and business opportunities, plus key industry players from Saudi Arabia and abroad | 

| 
Official website | 
[saudihoreca.com](https://www.saudihoreca.com/Riyadh/EN/index.html) | 

| 
Status | 
On schedule (last checked 29 October 2026) | 

You can follow this edition and other upcoming shows in our [Saudi exhibitions calendar](https://bilievent.com/saudi-exhibitions-calendar/), which we update whenever an organiser announces a change.

## What the show covers this year

HORECA is the common shorthand for hotels, restaurants and cafés, and the exhibition is built around that buyer. According to its organiser, it focuses on hospitality, foodservice and beverages and draws a specialised audience looking for new trends and business opportunities, along with the sector’s key players at local and international level.

The programme goes beyond the exhibition floor. It includes workshops, culinary art shows, the Salon Culinaire, the Saudi Elite Chefs competition, a barista competition and a mocktail competition. In practice, many visitors come to see products being prepared and served, not only to collect brochures, and that should shape what you put on your stand.

The official website lists exhibitors on a platform it shares with Host Arabia and Salon du Chocolat et de la Pâtisserie Riyadh. It is worth studying that list before you choose a plot from the floor plan, so you know who will be around you in the hall.

## Who exhibits and who visits

This is a trade event first, so it suits companies that sell to hotels, restaurants, cafés and foodservice operators more than brands looking for end consumers. Typical exhibitor profiles include:

- Food and beverage producers and distributors targeting the hospitality channel.

- Suppliers of commercial kitchen equipment and hotel and restaurant fit-out.

- Coffee and beverage equipment companies, especially with a barista competition in the programme.

- Service and technology providers for restaurant and hotel operators.

- Foreign companies looking for a distributor or partner inside Saudi Arabia.

Visitors, according to the organiser, are industry professionals and decision makers. Design your message and your meeting space for that visitor: a buyer who wants to taste, compare and ask about supply terms and volumes.

That shapes the floor plan of your stand. An open front area for display or tasting draws people in, a quieter table or corner lets you talk to serious buyers, and a closed back area holds samples and tools. On a small stand, pick one element that can be seen from across the aisle, such as a product wall, a screen or focused lighting, instead of filling every wall with messages.

## Organiser deadlines and exhibitor rules

The official website publishes an exhibitor registration form, a stand booking page with the available options, a floor plan and the exhibitor manual. At the time of our check, the manual online was the 2025 edition, so treat what it asked for as a guide to what you will need, not a replacement for the 2026 manual:

- A 1:100 stand drawing in duplicate with the contractor’s details, at least one month before the show, for every space-only exhibitor.

- Two copies of technical drawings with all heights one month before build-up; construction could not start without approved drawings and calculations.

- A copy of the insurance policy at least one week before build-up, without which work could not begin.

- An electricity order with a grid plan; orders were not processed without it, and late orders carried a 25% surcharge.

- A 3.5 m height limit for space-only stands unless agreed in writing, rear and side walls of at least 2.5 m, and island stands allowed to close half of each side up to 4 m.

- Two build-up days before opening in 2025, with stands finished the evening before the show, and dismantling starting on the evening of the last day and ending the next day.

Space contracts were paid in three instalments linked to the show date, and freight went through the organiser’s appointed logistics agent. Request the 2026 manual through the contact details on the official website and check these points before you sign off the design.

## Getting there and the venue

Riyadh Front Exhibition & Conference Center sits on King Khalid International Airport Road in north Riyadh, and the show’s official website marks it on the map as the 2026 venue. Doors open on 7 December at 4:00 pm, according to the countdown on the official site.

In 2025, visitor hours ran into the evening until 10:00 pm, with longer hours for exhibitors before visitors arrived. Confirm the 2026 hours with the organiser and plan stand shifts around them: long evening show days need at least two teams.

## Common mistakes exhibitors make at hospitality shows

- **Approving the design late:** drawings were due a month before the show, so set an internal sign-off date well ahead of that.

- **Forgetting water and power for live preparation:** if you plan tastings or demos, put water and power points on the grid plan before the deadline.

- **Going over the height limit:** design within 3.5 m, or ask for written approval early if you need a taller element.

- **Leaving insurance to the last minute:** have the policy ready a week before build-up so your installers are not stopped at the gate.

- **No storage on the stand:** samples, cups and consumables need a closed corner, so plan it into the design from the start.

- **Relying on last year’s manual:** build-up and hand-over times can change, so read the 2026 manual as soon as it is published.

## Your stand at Saudi HORECA Riyadh 2026: Saudi HORECA booth design and build

Plan backwards from the last date in the exhibitor manual: build-up, then the drawing deadline set by the organiser, then your internal design approval, then the start of fabrication. The time between those steps depends on the size and complexity of your exhibition stand, and our [booth production timeline guide](https://bilievent.com/guides/booth-production-timeline/) explains what drives each stage.

- Book your space and confirm its position on the floor plan.

- Send your stand builder the size, position, what you will show and how many staff will be on the stand.

- Approve the 3D design and drawings inside your company.

- Submit drawings to the organiser on time, with contractor details and the insurance policy.

- Order power and water with the grid plan, then follow fabrication and installation.

At bilievent we design your stand and prepare the drawings for organiser approval, fabricate it in our own 400 m² workshop in Al Sulay, Riyadh, install it on site, support you during the show days, dismantle it after closing and store reusable elements for your next participation. The work can include lighting and screens built into the stand, plus banners, roll-ups, stickers and printed bags through our [event branding service](https://bilievent.com/event-branding/). See how we work on our [exhibition stand builder in Riyadh](https://bilievent.com/exhibition-stand-builder-riyadh/) page, and estimate your budget with our [exhibition booth cost guide](https://bilievent.com/guides/exhibition-booth-cost-saudi-arabia/).

[Get a stand quote for Saudi HORECA Riyadh](https://bilievent.com/request/booth-proposal/?event=Saudi%20HORECA%20Riyadh%202026&venue=Riyadh%20Front%20Exhibition%20%26%20Conference%20Center&city=riyadh&start=2026-12-07&end=2026-12-09)

If you have booked your space or plan to, send us the stand size, its position on the floor plan and what you want to show, and we will come back with a first concept and a clear quote. You can also [request a quote](https://bilievent.com/request/) for any other part of your participation. Need screens or a side event too? See our [LED screens for events and booths in Riyadh](https://bilievent.com/avl-production/led-screen-rental-riyadh/) and [event management](https://bilievent.com/event-management/) services.

Frequently asked questions · bilievent

Use this infographic on your site
Copy the code below into your site, and please keep the credit link.

<a href="https://bilievent.com/events/saudi-horeca-riyadh-2026/"><img src="https://bilievent.com/wp-content/uploads/2026/10/saudi-horeca-riyadh-2026-faq.webp" alt="Frequently asked questions: Saudi HORECA Riyadh 2026 | bilievent" width="1080" height="1350"></a><br>Source: <a href="https://bilievent.com/events/saudi-horeca-riyadh-2026/">bilievent</a>

## Frequently asked questions

### When and where is Saudi HORECA Riyadh 2026?

Saudi HORECA Riyadh 2026 runs on 7–9 December 2026 at Riyadh Front Exhibition & Conference Center on King Khalid International Airport Road in Riyadh. The countdown on the official website ends at the opening on 7 December at 4:00 pm. Check the official site before you travel or ship, because the organiser is the source of any change to dates or opening hours.

### How do I book exhibition space at Saudi HORECA Riyadh?

Bookings go through the exhibitor registration form on the official website. You can choose a shell scheme stand from 12 m², a space-only plot for stands over 24 m², or a double-deck stand built to a design approved with the contract. Rates vary by position: inline, corner, peninsula or island. Ask for the contract and the exhibitor manual before you sign.

### What are the stand design rules at the show?

In the 2025 exhibitor manual, space-only exhibitors had to submit a 1:100 drawing with contractor details one month before the show, keep stands within a 3.5 m height limit unless approved in writing, and provide an insurance policy a week before build-up. These are last year’s rules, so request the 2026 manual to confirm them or spot any change.

### Who can design and build our stand at Saudi HORECA Riyadh 2026?

bilievent designs your stand and prepares the drawings for organiser approval, fabricates it in its own 400 m² workshop in Al Sulay, Riyadh, installs it on site, dismantles it after the show and can store reusable elements. Before you appoint any builder, check the contractor rules and the documents the organiser requires in the exhibitor manual.

### How early should we order our stand for Saudi HORECA Riyadh?

Start from the build-up date the organiser publishes in the 2026 exhibitor manual, then work back to the drawing deadline, which in 2025 was at least one month before the show, and then to your internal design approval. There is no fixed lead time for every stand, because size and materials decide fabrication time, so talk to your builder as soon as you book.

### What are the visiting hours of Saudi HORECA Riyadh 2026?

The show opens on 7 December 2026 at 4:00 pm, according to the countdown on the official website. In 2025, visitor hours ran into the evening until 10:00 pm, with longer hours for exhibitors before visitors arrived. Confirm the 2026 hours with the organiser before you set your stand team’s rota and your meeting schedule.
