# Saudi Plastics & Petrochem 2027: exhibitor and stand guide

> Saudi Plastics & Petrochem 2027: 26–29 April 2027 at RICEC, Riyadh, with Saudi Print & Pack, and how to get your stand designed and built in Saudi Arabia.

Source: https://bilievent.com/events/saudi-plastics-print-pack-2027-exhibitor-guide/ · bilievent · 2026-11-11

Saudi Plastics & Petrochem 2027 runs from 26 to 29 April 2027 at the Riyadh International Convention & Exhibition Center (RICEC) on King Abdullah Road, Riyadh, alongside Saudi Print & Pack 2027, with both shows held as part of Riyadh International Industry Week, according to the organiser, Riyadh Exhibitions Company (REC).

The two shows share dates, venue and organiser, so many suppliers treat them as one buying audience: plastics machinery, materials and petrochemicals on one side, printing and packaging technology on the other. This guide covers what each show includes in 2027, who exhibits and who visits, what REC publishes for exhibitors, how to reach RICEC, and how to plan an exhibition stand or exhibition booth that is approved and built on time. If you are already comparing builders, start with this overview of an [exhibition stand builder in Riyadh](https://bilievent.com/exhibition-stand-builder-riyadh/).

## Key takeaways

- Saudi Plastics & Petrochem and Saudi Print & Pack both run 26–29 April 2027 at RICEC in Riyadh, organised by REC with Messe Düsseldorf as partner.
- The organiser presents both as 22nd editions, held within Riyadh International Industry Week alongside Saudi Smart Logistics & Warehousing.
- REC’s post-show report for 2023 lists 20,000 sqm of exhibition space, 522+ exhibitors from 23+ countries and 16,020+ visitors.
- The booking form offers two space types, inside space only or inside space with the organiser’s stand-fitting, in sizes from 9 sqm upward.
- Build-up days, contractor rules and the exhibitor manual are not on the public websites, so ask REC for them before you finalise a design.

## Saudi Plastics & Petrochem 2027 at a glance

| Item | Details | 
| Dates | 26–29 April 2027; open to visitors 13:30–21:30 | 
| City and venue | Riyadh, Riyadh International Convention & Exhibition Center (RICEC), King Abdullah Road | 
| Organiser | Riyadh Exhibitions Company (REC), with Messe Düsseldorf as partner | 
| Sectors | Plastics & Petrochem: machinery, moulds and dies, raw materials and chemicals, polymer and rubber products, petrochemicals, rubber and foam. Print & Pack: prepress, printing, signage, finishing, paper and board, packaging machines and materials, production machines for food, beverages, pharmaceuticals and cosmetics, automation and digital services | 
| Who exhibits / who visits | International and local suppliers of machinery, technologies, materials and services / trade buyers, industry professionals, consultants, materials traders, business owners, government decision-makers, agencies, and producers in food, pharmaceuticals, consumer goods and retail | 
| Official website | [saudipp.com](https://saudipp.com/) | 
| Status | Scheduled (last checked 28 October 2026) | 

## What Saudi Plastics & Petrochem and Saudi Print and Pack cover in 2027

**Saudi Plastics & Petrochem** is organised around nine product categories: machinery; moulds and dies; raw materials and chemicals; products from polymer materials and rubber; petrochemicals; rubber materials; rubber chemicals; foam materials; and foam technologies. The organiser calls it a gateway to the largest plastics and petrochemicals market in the region and says the show has sold out for 18 years. Messe Düsseldorf is the partner, and the show is presented as “powered by K”, the Düsseldorf trade fair for plastics and rubber.

**Saudi Print and Pack** covers 17 categories. On the print side they run from prepress, premedia and multichannel through printing technologies, signage and imaging, to post-press, converting and finishing, paper and board, and materials and consumables. On the packaging side they include packaging machines, packaging production and packaging printing equipment, packaging materials and accessories, and production machines for food, beverages, pharmaceuticals and cosmetics. Storage and logistics equipment, automation components and digital services complete the list.

Both shows sit inside Riyadh International Industry Week, which also includes Saudi Smart Logistics & Warehousing, and an international conference with workshops on industry trends and new technologies for plastics, petrochemicals, printing, packaging and the sectors that use them. The organiser says conference sessions and workshops are free but need pre-registration. For scale, REC’s post-show report for the 2023 edition lists 20,000 sqm of exhibition space, 522+ exhibitors, 23+ countries and 16,020+ visitors. REC itself says it has organised trade events for some 40 years, has run 450 events and is a member of UFI, the global association of the exhibition industry.

## Who should exhibit, and at which show

The booking form asks you to choose one show, so start by matching your products to the organiser’s categories:

| If you supply… | Best fit | 
| Plastics machinery, moulds and dies | Saudi Plastics & Petrochem | 
| Polymers, raw materials, chemicals, rubber and foam | Saudi Plastics & Petrochem | 
| Printing systems, prepress, finishing, signage and imaging | Saudi Print & Pack | 
| Packaging machines, packaging materials and accessories | Saudi Print & Pack | 
| Production machines for food, beverages, pharmaceuticals or cosmetics | Saudi Print & Pack | 
| Storage, logistics and warehousing equipment | Saudi Print & Pack, or ask REC about Saudi Smart Logistics & Warehousing | 

On the visitor side, the organiser lists trade buyers, plastics and petrochemicals professionals and consultants, materials traders, business owners and decision-makers for the plastics show. For print and packaging it adds printing and packaging professionals, suppliers and distributors, investors, advertising, design and production agencies, and producers in food, pharmaceuticals, consumer and industrial goods, and retail. If your customers are converters, brand owners or factory managers, this is one of the few places in Riyadh where they gather in one hall for four days.

## Organiser dates and rules for exhibitors

This is what REC publishes on its official websites:

- **Dates and hours:** 26–29 April 2027, open to visitors from 13:30 to 21:30.
- **Age limit:** visitors under 16 are not admitted.
- **Booking:** an online form where you select Saudi Plastics & Petrochem or Saudi Print & Pack, then choose inside space only or inside space with the organiser’s stand-fitting. Listed sizes start at 9 sqm and rise in 3 sqm steps to 27 sqm, with an option for larger spaces.
- **Not published:** prices, booking deadlines, build-up and dismantling days, stand design approval deadlines, contractor registration and the exhibitor manual.

Machinery shows add questions that a general trade show does not. Ask REC in writing:

- What are the build-up and dismantling days and hours, and when can heavy machines be delivered?
- What is the floor loading limit, and is there a separate procedure for heavy or running exhibits?
- Which power supply is available on space-only stands, and are compressed air or water connections offered?
- What is the deadline and format for stand design submission?
- Are stand contractors required to register or hold specific approvals?
- What are the height, rigging and fire safety limits?

If you are undecided between the organiser’s stand-fitting and a custom build on space only, the [shell scheme vs custom booth guide](https://bilievent.com/guides/shell-scheme-vs-custom-booth/) compares cost, flexibility and timing.

## Getting to RICEC

RICEC is on King Abdullah Road in Riyadh. The organiser’s FAQ gives these visitor details:

- VIP visitors use Gate 5 on King Abdullah Branch Road, with free parking and valet service.
- General visitor parking is reached through Gate 3.
- A food court is on the left of the main entrance.
- Regular taxis are available, and Uber and Careem can be booked through their apps.

The public pages do not describe exhibitor access, goods entrances or delivery slots. Ask REC for the logistics section of the exhibitor manual before you book freight or forklifts.

## Common mistakes exhibitors make at industrial shows like this

- **Bringing working machines without a services plan.** A machine that cannot run is just a large object. Confirm power, air, water and floor loading with the organiser before the stand is designed around it.
- **Choosing the space type too late.** Organiser stand-fitting and space only lead to very different stands. Decide at booking, because changing later usually costs time and money.
- **Booking the wrong show.** The two shows sit side by side, but visitors search by category. Book under the show that matches your main products and use clear signage for the rest.
- **English-only graphics.** Many buyers and factory owners read Arabic first. Keep key messages bilingual and readable from the aisle.
- **Ignoring the conference.** The free conference and workshops draw the same decision-makers. Use them to set up meetings and invite people back to your stand.

## Your stand at Saudi Plastics & Petrochem 2027

Plan the stand backwards from the build-up date REC publishes in the exhibitor manual. Once you have it, count back through build-up, transport, fabrication, organiser approval of the drawings, design development and the brief, and add the time machine suppliers need to confirm dimensions and services. The [booth production timeline guide](https://bilievent.com/guides/booth-production-timeline/) walks through each step in order.

bilievent is a Riyadh company, founded in 2025, that designs, fabricates and installs exhibition stands from its own 400 m² workshop in Al Sulay, Riyadh. For a Saudi Plastics & Petrochem stand builder or Saudi Print & Pack booth design, our [booth production service](https://bilievent.com/booth-production/) covers:

- stand design and the approval drawings the organiser requests;
- fabrication in our own workshop, build-up at RICEC, show-days support and dismantling;
- audio, lighting and screens as part of the managed stand;
- stand graphics, banners, roll-ups, signage and commercial print;
- storage and reuse of stand elements for companies that return every year;
- exhibition stand rental when buying a stand does not make sense.

Agencies can work with bilievent under NDA and on a white-label basis. Whoever builds your stand, confirm REC’s contractor rules in the exhibitor manual first. Our office on Anas bin Malik Road in Al Yasmin, Riyadh, receives clients Sunday to Thursday, 9:00–18:00.

[Get a stand quote for Saudi Plastics & Petrochem and Saudi Print & Pack](https://bilievent.com/request/booth-proposal/?event=Saudi+Plastics+%26+Petrochem+%2B+Saudi+Print+%26+Pack+2027&venue=Riyadh+International+Convention+%26+Exhibition+Center&city=riyadh&start=2027-04-26&end=2027-04-29)

If you are exhibiting at either show in April 2027, an early brief gives you more design options and fewer surprises at approval. [Request a quote from bilievent](https://bilievent.com/request/) with your space size, show and products, and the team will reply with next steps. Need screens or a side event too? See our [LED screens for events and booths in Riyadh](https://bilievent.com/avl-production/led-screen-rental-riyadh/) and [event management](https://bilievent.com/event-management/) services.

## Frequently asked questions

### When and where are Saudi Plastics & Petrochem and Saudi Print & Pack 2027?

Both shows run from 26 to 29 April 2027 at the Riyadh International Convention & Exhibition Center (RICEC) on King Abdullah Road, Riyadh. They are part of Riyadh International Industry Week and are organised by Riyadh Exhibitions Company (REC) with Messe Düsseldorf as partner. The organiser’s FAQ gives visitor opening hours of 13:30 to 21:30 on each of the four days.

### What is the difference between the two shows?

Saudi Plastics & Petrochem covers plastics machinery, moulds and dies, raw materials and chemicals, polymer and rubber products, petrochemicals, rubber and foam. Saudi Print & Pack covers printing, prepress, finishing, signage, paper and board, packaging machines and materials, and production machines for food, beverages, pharmaceuticals and cosmetics. They share dates, venue and organiser, but you book space under one show.

### How do we book space at Saudi Plastics & Petrochem 2027?

REC takes bookings through an online form on its official sites. You choose the show, then inside space only or inside space with the organiser’s stand-fitting, and a size from 9 sqm upward. Prices and deadlines are not published, so the organiser’s team confirms them. Ask for the exhibitor manual at the same time, because it holds the stand rules.

### What are the visitor rules at the show?

According to the organiser’s FAQ, visitors under 16 are not admitted, and the show is open from 13:30 to 21:30. VIP visitors use Gate 5 on King Abdullah Branch Road, where parking is free and valet is available, while general visitor parking is through Gate 3. Conference sessions and workshops are free but require pre-registration.

### Who can design and build our stand at Saudi Plastics & Petrochem 2027?

bilievent, a Riyadh company founded in 2025, designs, fabricates and installs exhibition stands from its own 400 m² workshop in Al Sulay, Riyadh. It prepares the organiser approval drawings, builds the stand at RICEC, supports you during the show and dismantles it afterwards, with storage and reuse available. Confirm REC’s contractor rules in the exhibitor manual before appointing any builder.

### How early should we order our stand for Saudi Plastics & Petrochem?

Work backwards from the build-up date REC publishes in the exhibitor manual. A custom stand generally needs time for design, organiser approval, fabrication and build-up, and machinery exhibitors also need time to confirm machine sizes, power and floor loading. Request the manual when you book. bilievent’s booth production timeline guide explains each step and what it depends on.
