# Booth print files: checklist before production

> Check booth artwork before it goes to print: supplier specs, size and bleed, resolution, fonts, Arabic text, colour proofs and one named approver per panel.

Source: https://bilievent.com/guides/exhibition-booth-graphic-print-files/ · bilievent · 2026-11-11

**In short:** booth graphics fail at production for predictable reasons: the wrong size, no bleed, low-resolution images, missing fonts, colours that were never proofed, or a file that was approved by nobody. Check the six items below before you send artwork, and get one named person to sign off each panel.

This checklist is for marketing teams and designers sending booth artwork for production in Saudi Arabia. It covers what to check and who approves it. It does not set one technical standard for every material: each printer and each material (fabric, vinyl, rigid board, lightbox) has its own specification, and the supplier’s spec sheet always wins.

## 1. Ask for the supplier’s specification first

Before anyone starts designing, ask the production supplier for a spec sheet per graphic. It should state:

- the final visible size of each panel and the full print size including bleed;

- the bleed and safe-zone margins for that material;

- the scale they want files supplied at (full size or a fraction such as 1:10);

- the minimum effective image resolution at that scale;

- the colour profile or colour mode they print from;

- accepted file formats and how fonts should be handled;

- any seams, joins, folds, stitching or fixing points that cross the artwork.

There is no single DPI that is right for every booth graphic. A large fabric wall viewed from three metres needs a different effective resolution from a counter panel viewed at arm’s length. Use the figure the printer gives you for each item.

## 2. Size, bleed and safe zone

- Every file is at the exact size (or scale) in the spec, not “close enough”.

- Bleed is added on every edge that needs it, with backgrounds extended into it.

- Logos, text and faces sit inside the safe zone, away from seams, door frames, screens and counters.

- The file name carries the panel reference from the booth drawing, for example “W2-back-wall-left”.

## 3. Images and vectors

- Photos meet the supplier’s effective resolution at final size; check by viewing at 100% at the supplied scale.

- Logos and icons are vector wherever possible.

- No images are linked from someone’s laptop: links are embedded or packaged with the file.

- You have the right to use every image at this size and in this market.

## 4. Text and fonts

- Fonts are outlined or embedded, as the supplier asks.

- Arabic text has been set by someone who reads Arabic, checked for joined letters, direction and line breaks after export, not only in the design file.

- Phone numbers, URLs, QR codes and product names have been checked against the source. Scan every QR code from the proof.

- Text size works at the viewing distance; a quick test is to print a section at 100% and view it from the expected distance.

## 5. Colour

- The file uses the colour mode or profile the supplier asked for.

- Brand colours that matter (a logo colour, a corporate background) have a physical proof or strike-off on the actual material before the full run.

- Lightbox graphics are proofed lit, because colours look different with a backlight.

## 6. Approval: one name per panel

Late or unclear approval is a common reason artwork misses a production slot. Use a simple approval sheet (a template follows) and do not release files until every row is signed.

| Panel ref. | Material | Final size | File name and version | Content approved by | Technical check by | Proof approved (date) | 
| W1 | e.g. fabric wall | | | | | | 
| W2 | e.g. rigid panel | | | | | | 
| C1 | e.g. counter front | | | | | | 
| LB1 | e.g. lightbox | | | | | | 

“Content approved” means the brand or client owner has checked wording, logos and claims. “Technical check” means someone has checked the file against the supplier’s spec. They can be different people, and they should be named.

## Before you press send

- Files are named by panel reference and version, and old versions are removed from the folder you share.

- A PDF or JPG preview of the whole booth, with panel references marked, goes with the print files.

- The supplier has confirmed receipt and the deadline after which changes cost time or money.

- Any change after approval is a new version with a new date in the approval sheet.

For the full list of what a booth supplier needs at the start (floor plan, organizer manual, brand files), see [what to send your booth contractor](https://bilievent.com/guides/what-to-send-your-booth-contractor/).

## How bilievent can help

We design and produce exhibition booths in Saudi Arabia and can review your artwork against the production spec before files go to print. See our [booth design and production](https://bilievent.com/booth-production/) service and [booth design in Riyadh](https://bilievent.com/booth-design-riyadh/). For the full build, see our [exhibition stand builder in Riyadh](https://bilievent.com/exhibition-stand-builder-riyadh/) and [exhibition stand builder in Jeddah](https://bilievent.com/exhibition-stand-builder-jeddah/) pages. For fabrication, see our [booth fabrication in Saudi Arabia](https://bilievent.com/booth-fabrication-saudi-arabia/) page.
