
Take part
Booth quotes and exhibiting are handled by the bilievent team; attendee registration opens the official website of Saudi Build + Saudi Elenex 2027.
Saudi Build 2027 will run on 1–4 November 2027 at the Riyadh International Convention & Exhibition Center (RICEC) in Riyadh, after the organiser, Riyadh Exhibitions Company (REC), postponed the 36th edition from its original 2–5 November 2026 dates in a press release reported on 18 October 2026. The 27th Saudi Elenex, the power, energy and lighting show held alongside it, moves to the same dates. REC said the decision was made for the safety and well-being of its stakeholders and to allow more time for international participation, and the official website now lists 1–4 November 2027.
If you had planned to exhibit at Saudi Build 2026, the postponement changes your timeline, not your goals. Instead of a rushed build a few days before opening, you now have time to brief, design and approve an exhibition stand properly. This guide sets out what the organiser has confirmed, what it has not published yet, and how to plan your exhibition booth backwards from the show dates. If you are already shortlisting an exhibition stand builder in Riyadh, it also lists what to ask before you sign.
Everything below comes from the official Saudi Build website and the organiser’s announcement, checked on 28 October 2026. Where the organiser has not published something, such as build-up days or contractor rules, we say so and point you to the right place to ask.
Key takeaways
- Saudi Build and Saudi Elenex are postponed from 2–5 November 2026 to 1–4 November 2027, still at RICEC in Riyadh.
- The organiser is Riyadh Exhibitions Company (REC), and the show is held under the patronage of the Ministry of Municipalities and Housing.
- The space booking form offers two options: inside space only, or inside space with the organiser’s stand-fitting.
- Build-up days, stand approval deadlines and contractor rules are not on the website yet, so request the exhibitor manual from REC.
- The extra year makes a fully custom stand realistic, as long as you plan it backwards from the build-up date REC confirms.
Saudi Build 2027 at a glance
| Dates | 1–4 November 2027 (postponed from 2–5 November 2026) |
|---|---|
| City and venue | Riyadh, Riyadh International Convention & Exhibition Center (RICEC), King Abdullah Road |
| Organiser | Riyadh Exhibitions Company (REC), under the patronage of the Ministry of Municipalities and Housing |
| Sectors | Building materials, interiors and finishing, doors, windows and glass, sanitary ware, kitchens, stone, wood, elevators, landscape, lighting, power and renewable energy, HVAC-R, smart buildings, tools and safety, facilities management, and plant, machinery and vehicles (PMV) |
| Who exhibits / who visits | Suppliers, manufacturers and solution providers / trade buyers, distributors, project owners, investors, consultants, architects, engineers, specifiers and government officials |
| Official website | saudi-build.com |
| Status | Rescheduled by the organiser to 1–4 November 2027; last checked 28 October 2026 |
What Saudi Build and Saudi Elenex cover
Saudi Build presents itself as the Kingdom’s longest-running platform for the construction sector. Its homepage lists 18 exhibit categories: building materials; paints and interiors; doors and windows; sanitary ware; elevators and escalators; floor coverings; kitchens and closets; wood products technology; landscape and hardscape; stone technology; lighting solutions; power and electricity; renewable energy; HVAC-R; PMV (plant, heavy machinery and vehicles); smart buildings; tools and safety; and facilities management.
Saudi Elenex runs alongside it and focuses on electricity, alternative and renewable energy, lighting and fittings, HVAC-R and electromechanical systems, smart home, building and city technologies, and tools and safety. The organiser also runs a conference, the International Future of Building Summit. Its sessions and workshops are free to attend but need pre-registration.
On scale, the organiser’s event page says the 35th edition drew over 620 exhibitors from more than 35 countries and more than 27,500 visitors. Other pages on the site show different figures without naming the edition, so treat the 35th-edition numbers as the clearest reference and ask REC for its latest post-show report before you decide on stand size.
Who should exhibit at Saudi Build
The official “Why exhibit” page aims the show at companies that want to reach public and private sector decision makers, trade buyers and project owners in what it calls the largest construction market in the region. Based on the categories above, the show suits:
- manufacturers and brands of building materials, finishes, doors, windows, glass, stone and sanitary ware looking for Saudi distributors and project specifications;
- suppliers of HVAC-R, lighting, power and renewable energy products, who also match the Saudi Elenex audience;
- machinery, tools and safety suppliers selling to contractors;
- smart building, facilities management and technology providers working with developers and project owners;
- international companies testing the Saudi market and looking for agents or distributors.
The organiser lists the visitors you will meet as decision makers and trade buyers, building materials traders and distributors, project owners and investors, architects and interior designers, construction engineers, energy, lighting and air-conditioning specialists, and government officials and policy makers. Entry is free for trade and industry professionals, and visitors under 16 are not admitted.
Organiser dates and rules for exhibitors
Here is what the official website states for the 2027 edition, and what it leaves open:
- Show days and hours: the FAQ page lists 1 November 2027 from 4:00 pm to 9:30 pm, then 2–4 November 2027 from 1:30 pm to 9:30 pm. Some page footers still show the old November 2026 weekday timings, so confirm hours with REC.
- Space types: the “Book your space” form lets you choose “inside space only” or “inside space with organizer’s stand-fitting”, with stand sizes from 9 to 27 square metres, or more than 27.
- Build-up, dismantling and approvals: the website does not publish build-up days, dismantling days, stand drawing deadlines or rules on approved contractors.
- Exhibitor manual: no manual is posted online. Ask REC for it as soon as you book, because it sets the deadlines your stand plan depends on.
If you had already booked space for the 2026 dates, contact REC about how your booking, stand position and any payments carry over to 2027. The website does not explain this, so get the answer in writing before you commit to stand design or fabrication.
Getting to RICEC
RICEC is on King Abdullah Road in Riyadh. The organiser’s venue page says the Riyadh Metro Red Line serves the venue at Riyadh Exhibition Station, and that free visitor parking is available on the exhibition grounds. By car, the same page gives directions from the Eastern Ring Road and from Airport Road via King Abdullah Road and King Abdullah Branch Road. The FAQ adds that regular taxis, Uber and Careem are available.
For exhibitors, access matters as much as visitor parking. Delivery routes, loading times and vehicle passes for stand materials are set by the organiser and the venue, so request them with the exhibitor manual and share them with your stand contractor early.
Common mistakes exhibitors make at construction shows, and how to avoid them
- Treating the postponement as a reason to pause. A year sounds long, but internal approvals, budgets and product launches still take time. Fix your brief, budget and stand size before you approach contractors, not after.
- Showing heavy products without checking access and floor loads. Stone, machinery and glass need delivery, handling and floor-load checks. Ask REC and the venue for the rules before you design around a heavy exhibit.
- Forgetting utilities on a space-only plot. Power, water and compressed air for live demonstrations must be ordered through the organiser’s process. Our space-only utilities coordination guide explains what to request and when.
- Designing before reading the manual. Height limits, open-side rules and drawing deadlines change what you can build. Get the manual first, then design.
- Leaving no room to talk business. Saudi Build visitors include project owners and distributors who want to discuss terms. Plan a seated meeting area and storage for samples and catalogues.
Your stand at Saudi Build 2027
With the show now in November 2027, plan your stand backwards from the build-up date REC publishes in the exhibitor manual. From that date, work back to the organiser’s stand drawing deadline, then to fabrication, design sign-off and your internal brief. Until REC confirms build-up and approval dates, treat any schedule as provisional and leave room for a revision round with the organiser.
A custom stand generally moves through design, organiser approval drawings, fabrication and build-up. Our booth production timeline guide walks through each step, and our exhibition booth cost guide for Saudi Arabia explains what drives the budget.
If you are looking for a Saudi Build stand builder, this is what bilievent does for exhibitors at this show:
- Saudi Build booth design, organiser approval drawings, fabrication in our own 400 m² workshop in Al Sulay, Riyadh, build-up at RICEC, show-days support and dismantling.
- Exhibition stand rental for exhibitors who want a lighter option.
- Storage and reuse of stand elements after the show.
- Event branding and print, including banners, roll-ups and signage, plus audio, lighting and screens as part of a managed stand.
- For agencies: NDAs and white-label delivery under the agency’s name.
bilievent was founded in 2025 and works inside Saudi Arabia only. Our office is on Anas bin Malik Road in Al Yasmin, Riyadh, and receives clients Sunday to Thursday, 9:00 to 18:00. We are not appointed by the organiser, so confirm REC’s contractor rules in the exhibitor manual before you appoint any builder.
Get a stand quote for Saudi Build
Saudi Build 2027 is a year away, which is the best position an exhibitor can be in. Send us your space size, hall location if known, and goals, and we will come back with a design direction and a quote. Request a proposal from bilievent. Need screens or a side event too? See our LED screens for events and booths in Riyadh and event management services.
Frequently asked questions
When is Saudi Build 2027?
Saudi Build 2027 runs on 1–4 November 2027 at RICEC in Riyadh, together with Saudi Elenex. The organiser, Riyadh Exhibitions Company, postponed the edition from its original 2–5 November 2026 dates in October 2026. The official FAQ lists opening hours of 4:00 pm to 9:30 pm on 1 November and 1:30 pm to 9:30 pm on 2–4 November 2027.
Where is Saudi Build held and how do we get there?
The show is held at the Riyadh International Convention & Exhibition Center (RICEC) on King Abdullah Road, Riyadh. The organiser’s venue page says the Riyadh Metro Red Line stops at Riyadh Exhibition Station and that free visitor parking is available on site. Taxis, Uber and Careem also serve the venue. Ask the organiser for exhibitor delivery and loading arrangements.
How do we book exhibition space at Saudi Build?
Use the Book Your Space form on the official website or contact Riyadh Exhibitions Company directly. The form offers inside space only or inside space with the organiser’s stand-fitting, and sizes from 9 to 27 square metres or more. Pricing, deadlines and stand rules are not published online, so ask for the exhibitor manual when you book.
Who can design and build our stand at Saudi Build 2027?
bilievent designs, fabricates and installs exhibition stands from its own 400 m² workshop in Al Sulay, Riyadh, and handles organiser approval drawings, build-up, show-days support and dismantling at RICEC. It also offers stand rental, storage and reuse. Before appointing any contractor, confirm the organiser’s contractor and approval rules in the Saudi Build exhibitor manual.
How early should we order our stand for Saudi Build?
Work backwards from the build-up date the organiser publishes in the exhibitor manual, which is not on the website yet. A custom stand generally needs time for design, organiser approval, fabrication and build-up, so start your brief as soon as your space is confirmed. bilievent’s booth production timeline guide explains each step.
What happens to space booked for the 2026 dates?
The official website does not explain how bookings made for 2–5 November 2026 transfer to the new 1–4 November 2027 dates. Contact Riyadh Exhibitions Company directly and get written confirmation of your space, position and any payments before you commit to stand design, printing or fabrication for the 2027 edition.