Skip to content
العربية

Also in: العربية · Türkçe

November 2, 2026

Conference technical rehearsal: the day-before checklist

Conference technical rehearsal: the day-before checklist | bilievent

A conference technical rehearsal is a full run of the audio, lighting and screens (AVL) in the actual room before the event, using the final presentations and the real speakers or stand-ins. The best time is the day before opening, once installation is complete and before the room fills up, because anything you find can still be fixed that evening.

This checklist explains why the rehearsal should never be cut, who needs to attend and who makes the calls, and then walks through sound and lighting, screens and presentations item by item. It ends with a contingency plan for the day itself and a table you can print and hand to your team.

Key takeaways

  • A technical rehearsal is a full run of the programme in the room, not a quick check that the equipment switches on.
  • The day before the conference is the right slot, because it leaves an evening to fix whatever goes wrong.
  • Someone from the organising side with authority to decide must attend, together with the programme or stage manager, the technical crew and at least one speaker.
  • Every presentation runs from the machine that will be used on the day, with the final fonts and videos.
  • The contingency plan is written before the rehearsal and partly tested during it: spare microphone, backup playback machine, second copy of every file.

Why the rehearsal should not be cut short

Most of the problems an audience notices at a conference are not equipment failures. They are details nobody tried in the room: a deck designed for one screen ratio shown on another, a video with no sound because its audio was never routed into the system, a lapel microphone that squeals when the speaker walks towards the front speakers, or lighting that leaves a face in shadow on camera. A rehearsal is one stage of a wider plan, which we set out in our guide to conference management in Riyadh.

None of this shows up in meetings or on paper. It appears only when the whole show runs. That is why the rehearsal is not a luxury to drop when time is tight; it is the one chance to see the conference the way delegates will see it, before they arrive. The bigger the event, and the more it relies on live streaming, simultaneous interpretation or remote speakers, the more it matters.

How long a rehearsal takes depends on the number and complexity of sessions, not on a fixed rule. A single session with two speakers is a different job from a full day of panels, videos and moves between the main stage and breakout rooms. A practical rule: try every type of transition at least once, and every speaker who uses a different microphone or their own device.

Who attends the rehearsal and who decides

A rehearsal attended only by the technical team finds half the problems. The engineer can hear that the sound is clear, but may not know the running order changed yesterday or that a sponsor asked for its logo at a particular moment. So the rehearsal needs:

  1. A decision-maker from the organiser: someone who can approve a change to the running order or cut a long video without calling anyone.
  2. The programme or stage manager: holds the final minute-by-minute running order and calls the cues.
  3. The technical crew: sound engineer, lighting operator, screens and playback operator, and the streaming lead if there is one.
  4. The host and at least one speaker: to test real voices and stage movement; a team member can stand in for speakers who have not arrived.
  5. The camera or streaming lead: what looks fine in the room can look very different on camera.

Agree before you start who has the final word. If marketing wants a longer video and the programme manager wants it cut, settle it in the rehearsal, not on stage.

Sound and microphones

Sound is what delegates notice first and what ruins an impression fastest. In the rehearsal, check:

  • Every microphone by name: lectern, handhelds, lapel microphones and the audience microphones for questions.
  • The sound from the back row and the sides, not just near the stage, because speaker coverage differs from room to room.
  • Speaker movement on stage, especially near the front speakers, to rule out feedback.
  • The level of video and walk-in music compared with the speaker’s voice.
  • Batteries: where the charged spares are, who swaps them and when.
  • Simultaneous interpretation if you have it: channels, receivers and how clearly the interpreters hear the stage.

Ask each speaker to talk in their normal voice rather than a test voice. Many people project in the rehearsal and then speak softly in front of the audience.

Screens and presentations

The most embarrassing conference moments usually happen on screen. Collect the final decks well before the rehearsal and play every one of them on the machine you will use on the day.

  • Size and ratio: check the deck matches the ratio of the room’s screens, with no cropping or black bars.
  • Fonts and language: Arabic fonts in particular can change on another machine, so save decks in a format that keeps them, and check text direction on bilingual slides.
  • Videos: play every embedded video with sound and make sure the transition into it does not lag.
  • Confidence monitor: can the speaker see the next slide and the time left? Who advances the slides, the speaker or the operator?
  • Side screens and stream: do they show the same content, the speaker’s image, or holding slides with logos between sessions?

If you are still choosing between an LED wall and a projector, read our guide to choosing an LED wall or projector for a business event before you sign off the design, because the choice changes the whole rehearsal.

Lighting and speaker movement on stage

At a conference, the first job of lighting is to make the speaker clearly visible in the room and on camera. Mood and transitions come second. In the rehearsal:

  • Mark where speakers will stand and check each position is lit without hard shadows on the face.
  • Run the lighting with the screens on, since some fixtures reflect on the screen and wash it out.
  • Walk through entrances, exits and any award handovers: where guests come up and where they leave.
  • Agree the house light level during sessions so delegates can still take notes.

Because sound and lighting, screens and playback all work together, ask the crew to run at least one complete transition: house lights down, opening video, host walk-on, first slide. That single sequence exposes most timing problems.

What to ask speakers before the rehearsal

Half of a good rehearsal is decided before it starts, in the message your speakers receive. If decks arrive late or in several versions, the rehearsal turns into a file-collection session instead of a test. Send every speaker, well ahead of the event:

  • The screen size and ratio, any template, and the file format you need.
  • The final deadline for the last version of the deck, and the name of the person receiving it.
  • A direct question: does the deck include video with sound, and do they need their own laptop or an internet connection?
  • The type of microphone available, and whether they will stay at the lectern or move around the stage.
  • The rehearsal time and the length of their slot in it, so they attend or send a stand-in.

You then arrive at the rehearsal with final files and settled questions, and spend the time testing rather than coordinating.

Remote speakers and live streaming

Remote speakers and live streams need the most rehearsal of all. Connect the remote speaker during the rehearsal itself, test their sound and picture in the room and on the stream, and make sure they can hear audience questions clearly. Agree what happens if the connection drops: does a pre-recorded version play, or does the host move to the next item? Test the full stream path too, from camera to the platform your online audience will watch, with sound and interpretation if you have it.

Contingency plan for the day

A good plan does not assume nothing will fail; it decides what happens when something does. Write it before the rehearsal and test some items for real:

  • A spare microphone of every type in use, tested and ready, with someone who knows where it is.
  • A backup playback machine with every deck loaded, ready for a quick switch.
  • An extra copy of every file on separate media, plus one with the programme manager.
  • A holding slide with the conference logo to show if a deck fails mid-session.
  • A ready line for the host to use if the crew needs a minute to fix something.
  • One communication channel between the stage manager and the technical crew, not a scatter of message groups.

Printable rehearsal checklist

Item What to confirm in the rehearsal Owner
Running order Final minute-by-minute version shared with everyone Programme manager
Microphones Every microphone tested by name; spare batteries ready Sound engineer
Room sound Clear at the back row and sides; no feedback when speakers move Sound engineer
Presentations Every final deck played on the event machine with its fonts and videos Playback operator
Confidence monitor Next slide and time left visible; slide control agreed Playback operator
Lighting Speaker positions lit; no reflection on the screens Lighting operator
Transitions At least one full sequence from house lights down to first slide Stage manager
Camera and stream Picture and sound right on camera and stream, if used Streaming lead
Contingency Spare microphone and playback machine; extra copies of files Technical crew
Decisions One person authorised to settle disagreements Organiser

Common mistakes and how to avoid them

  1. Rehearsing without final decks. Testing an old version reveals nothing. Set a firm deadline for final presentations before the rehearsal and stick to it.
  2. No decision-maker in the room. Problems get found but nobody can change the programme. Bring the person who decides, or give the attendee that authority.
  3. Testing equipment but not transitions. Each device works alone, but the handover between them fails. Run the opening sequence end to end.
  4. Moving the rehearsal to the morning of the event. Whatever you find that morning cannot be fixed in time. Hold it the day before whenever possible.
  5. Relying on memory. Write down what was found and decided, and send it to everyone before the end of the day.

How bilievent runs the technical rehearsal

At bilievent, event AV is part of the conference production we manage, not a separate equipment-hire service. Our rehearsal starts from the conference brief itself (the programme, number of sessions, speakers and any streaming) and the run plan and contingency plan are built on it. We deliver inside Saudi Arabia only: Riyadh, Jeddah and the Makkah region, the Eastern Province and the rest of the Kingdom. Coordination of event licensing is part of our event management service.

See how our event AV production works within managed events, and how we handle event and conference management. Before asking for quotes, prepare an AV brief for a business event, then use our guide to comparing event AV quotes like for like, including how each supplier prices the rehearsal itself. When you budget the whole conference, our guide to event management cost in Saudi Arabia lists the lines to include.

If you have a conference coming up and want one team to run its technical production from brief to rehearsal to show day, send us the programme, the venue and the expected attendance. Request a quote from bilievent.

Frequently asked questions: conference rehearsal | bilievent
Frequently asked questions · bilievent
Use this infographic on your site

Copy the code below to show this infographic on your site, and please keep the credit link.

<a href="https://bilievent.com/articles/conference-technical-rehearsal-checklist/"><img src="https://bilievent.com/wp-content/uploads/2026/11/conference-technical-rehearsal-checklist-faq.webp" alt="Frequently asked questions: conference rehearsal | bilievent" width="1080" height="1350"></a><br>Source: <a href="https://bilievent.com/articles/conference-technical-rehearsal-checklist/">bilievent</a>

Frequently asked questions

When should a conference technical rehearsal take place?

The best slot is the day before the conference, after the audio, lighting and screens are installed in the room and before delegates arrive. That timing leaves an evening to fix whatever the rehearsal reveals. If the venue is only available on the morning of the event, keep the rehearsal short and focused on the opening and first session, and have a clear contingency plan for the rest of the day.

Who should attend the technical rehearsal?

A decision-maker from the organiser, the programme or stage manager, and the technical crew: sound engineer, lighting operator, screens and playback operator, plus the camera or streaming lead if there is one. The host and at least one speaker should take part too. Most important, agree on one person who can settle any disagreement about the programme or content during the rehearsal itself.

What should we test in the sound and lighting during the rehearsal?

Test every microphone by name, including audience microphones for questions, and listen from the back row and the sides. Walk speakers near the front speakers to rule out feedback, and compare the level of videos and music with the speaker’s voice. For lighting, check every speaker position is lit without hard shadows and that no fixture washes out the screens.

How do we avoid presentation problems on the screens?

Collect the final decks before the rehearsal and play each one on the machine that will be used on the day. Check the slide ratio matches the screens, that Arabic fonts and text direction have not changed, and that every video plays with sound. Agree who advances the slides, and keep a backup machine loaded with every deck so you can switch quickly if needed.

What happens if a microphone or a presentation fails during the event?

That is what the contingency plan covers: a tested spare microphone with someone who knows where it is, a backup playback machine holding every file, a holding slide with the conference logo, and a ready line for the host while the crew works. Above all, keep one communication channel between the stage manager and the technical crew so fixes are quick and calm.

Does bilievent rent out AV equipment on its own?

No. bilievent provides event AV, meaning audio, lighting and screens, only as part of an event or conference it manages, or inside an exhibition stand it builds, not as standalone equipment hire. The service covers the brief, planning, installation, rehearsal and show-day operation, inside Saudi Arabia only. If you have a conference coming up, send us the programme, venue and attendance for a proposal.